You are here: Home > News > Asia > East Asia

Contact us

Company:SHENZHEN PENGLAI Industrial Corporation Limited

Factory Address:403B, No.99 Qiaocheng East RD,Nanshan District,Shenzhen,Guangdong ,China

Factory ADDRESS:St George Industrial Park,XinYu Road,ShaJing Town,Bao'an District,Guangzhou City,China

Contact:Jack Du

East Asia
South Korean customer bought screw caps capping machine semi automatic desktop capper
Date: 2017-02-27 10:51:11    Published by: PENGLAI INDUSTRIAL CORPORATION

Our customer from South Korea bought one(1*)set of screw caps capping machine(lotion bottles pump caps screw capping machine semi automatic desktop capper equip for Korean buyer آلة السد زجاجة model YX-SCM001) for the cosmetic packaging industry; Because our customer wanted the machinery urgently we speeded up the line and finished the machine within 2days after confirming the payment in full amount settled by our neighbor country.
After testing the machine and confirm there be okay all around the machine capping we send the machine via DHL. The next day our buyer got the machines and so far they gave us the positive feedback for the machinery for capping plastic bottles ;

As below there is the basic information for this sucessful business transaction:

Bank copy for desktop screw capping machine:

Bank copy for desktop screw capping machine.jpg

Bottles samples sent from customer:

Bottles samples sent from customer.jpg

Bottles samples.jpg

Testing running video of desktop screw capping machine:



Wooden case packing for model YX-SCM001 screw capping machine:

Wooden case packing for model YX-SCM001 screw capping machin

The model YX-SCM001 desktop screw cappin machine is uitable for the cap screwing of different shapes of bottles in the industries of foodstuff, pharmaceuticals,

daily chemical, pesticide and cosmetics etc. Its four adjustable speed motors are used respectively for cap supplying, bottle clamping, delivering and cap screwing.

It is characterized by high level of automation, outstanding stability, easy adjustment, no need of spare parts for replacing bottle types or caps, which can be done only by adjusting.

Ⅰ. Desktop Screw Capping Machine Function:

Desktop Screw Capping Machine drawing.jpg


1.Control panel      2.Power switch    3.Torque regulator  4.up and down adjustment    5.capping motor   6.cylinder      7.capping head 8.position withstand

capping machine drawing.jpg

Ⅱ:Main technical parameters:

vertical capping machine.jpg

1.     Power Voltage:AC220/50Hz

2.     Cap Diameter:¢16-¢45MM

3.     Capping speed:20-50PCS/min

4.     Applied bottle height:40-330MM

5.     Air compressure:0.2-0.6Kgf/cm

6.     Weight:25Kg

7.     Size:48(L)X40(W)X60(H)CM

Ⅲ:Operation Precautions:

semi automatic capping machine.jpg

1.     Before using, add ISOVG32 pneumatic gas oil or equivalent oil on the gas source processor.

2.     To adjust the capping head according to the bottle height.

3.     To adjust the cap size, according to the bottle cap, two sides adjust at the same time.

4.     To adjust the position withstand, let the bottle mouth under the center of the capping head.

5.     To adjust the Torque regulator meet capping strength.

6.     Switch on the power, open the hand sliding switch for gas.

7.     Control valve operation, first to pull up the adjustment switch can adjust the air pressure.

8.     Manual operation, to connect the food stamp switch under the electric box. Note: To be sure the manual/ automatic button on the red light position.

Ⅳ:Trouble treatment method

1.    Machine cannot open, check if it is supply AC220V power or power is damage, transformer burn off, change a new one.

2.     Cannot work automatic, manual/automatic doesn’t switch, or not open start button, or the wire board in trouble, electromagnetic valve cause it.

3.     Motor does not move, torque adjustment switch broken or transformer, capping motor, capping motor start button in trouble. 

4.     Capping lose or not tight, adjust the torque regulator.。

5.     Capping motor does not move, check if the power, or electromagnetic valve, wire board in trouble.

6.     Cap press cylinder does not move, check if the power, or electromagnetic valve, wire board in trouble.

Ⅴ:Operation panel function:

capping machine control panel.jpg

1.      Torsion Force Adjustment

2.      Capping pause interval tine display

3.      Lock cap time display

4.      Automatic

5.      Stop

6.      Manual

Ⅵ:System maintenance

1.     Before or after opening the machine, keep the machine inside and outside clean, to make sure the machine normal movement.

2.     In the morning and afternoon, check all screw of the machine, sure no loose, if find, tightening it with tool.

3.     Keep other products away from the machine, to avoid stop the machine move.

4.     Out of work time, turn off the power to avoid other trouble.

capping machine.jpg

How to change rubber wheels for screw capping machine model YX-SCM001:



Previous: Return
Next: Return